Turnigy reaktor 300w 20a ac dc12/29/2023 When you connect the external capacity resistance, you can use it as the maximum discharge power capacity-600W Lithium battery cell monitor looks at the per-cell voltages and process time during charge/discharge Unique lithium battery expanding discharge programme. Up to 300W unique regenerative discharge capability.Various charging/discharging settings and cycles to meet a wide range of customer needs.2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total charge(mah), and charging time and.Convenient set of 10 battery profiles that can be saved for later use.Cooling fan will start/stop automatically according to the internal temperature and charge/discharge power, and protect the charger from overheating.Advance synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%.2 x 300W High power, high current, high-performance power conversion circuit.Balance ports integrated into the side of the Reaktor's case means there is no need for extra balance boards to clutter up your table or to lose.īundled with the Turnigy Reaktor 2 x 300W is an array of charging wires and plugs, suitable for most of the batteries on the market today. The Reaktor also has protection for reversed polarity (input or output), low input voltage, charging capacity and time overrun. Monitor the health of your pack by checking the internal resistance of the battery pack as well as the per-cell internal resistance on balance tap equipped lithium packs. If any individual cell appears over-charged/discharged or the process has gone on for too long, the charger will generate an alarm sound and the related information will blink. If the temperature exceeds 60 degree celcius (140F), the cycle is stopped.įor added safety while charging lithium batteries, a cell monitor program looks at the per-cell voltages, and process time during charge/discharge. To protect itself, the Reaktor's internal cooling fan will start automatically when internal temperature reaches 55 degree celcius (131F), the output power is automatically reduced by 25%. On top of that, it also comes with special function modes like motor (brushed) break-in and foam-cut drive which are like icing on the cake. A powerful microprocessor handles numerous types of charging/discharging settings for different types of battery chemistry. This new Turnigy Reaktor 2 x 300W 20A Balance Charger with a compact case design will really blow you away by its high power, high current and it’s extremely efficient Advanced Synchronous Buck-Boost DC/DC converter system. Link to the charger – (I purchase from the USA East warehouse whenever possible, basic shipping is normally 3-4 days to Texas.) Plus I have some Hobby King credit, so as soon as they came in stock, I hit the Buy button. I read the Reaktor line is supposed to be a rebrand of the popular iCharger – that is nice. Not quite as much power as the Hitec, (but still plenty) and DC only input. I like my X1 - it is just too weak – so the X2 400 seemed like a good upgrade. First - The UP120ac – which could push 2 channels of 12a/120w power, and had built in AC/DC power. Looking at all of this, I narrowed my search to 3 chargers. So 2c or 3c charging meant I needed 10a-15a with wattage to push the amps. On Track days, it would be nice to be able to fully charge one battery in half an hour or less, so that I could have a full day with only 2-3 batteries. I really liked having 2 channels, plus I needed a minimum of 80w/5a per channel, for charging my 4s packs at 1c. So moving forward, I needed a new charger. Somewhere along the way, I also picked up a Hitec X1 – a single channel 5a/50w charger, with a full feature set. Yes, I was overworking it, and yes, it finally died. Plus when summer hit, with my garage hitting 95f, the charger would frequently thermal out and shut down when charging both channels at max rate. While it could handle 4s and 6s packs, the max wattage meant long charge times. When I got my Arrma 1/8 scale rigs, and needed to charge 4s and 6s packs, the PSD started to show it’s limits. Still, I used it and liked it for over a year. While it was a decent charger, it didn’t have some features like storage mode or discharge mode. The charger I purchased was a Dynamite Prophet Sport Duo – a basic 50w/6a two channel charger. History – When I got back into the hobby, I was running nimh and 2s lipo only. Also, I bought this charger with my money, no freebees here. This thread will get updated as I learn more about this charger. After months of looking, shopping, wishing, and finally killing my old charger, I finally jumped the fence and got the charger I’ve been wanting for a while – The Turnigy Reaktor 2x300w 20a I am still in the discovery phase with this charger, but I figured I would post up my thoughts on it.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |